Switch On/Off Bracelet and the Base Unit.

To switch the Bracelet ON, place the Bracelet/Transmitter face up on the “Bracelet Switch” area (there is a magnet inside the Base Unit in this area, and which you can’t see from the outside), the LED C will blink RED once indicating that the Bracelet is ON. Whilst the LED C will blink one time every 7 seconds until switched off.

To switch off, replace the Bracelet/Transmitter on the same switch area and the LED C should blink quickly several times to show it is switched off. After Bracelet is off, the LED C no longer blinks.

You cannot switch ON the Bracelet if it has no power. See section V for instructions on how to recharge the Bracelet.

Go Back